RELOOP – KEYFADR
Important note:
For the script to work, you need to set the KeyPad to Preset 2 by unplugging the USB cable and then holding channel button 2 (S A2) while plugging the USB cable back in.
To set the controller to use external sync for the arpeggiator and run in sync with Bitwig Studio, unplug the USB cable, then hold down the ARP button while plugging the cable back in.
Now channel buttons 1 and 8 (S A1 + A8) should light up. Press channel button 8 (S A8) for external sync.
For the script to work, you need to set the KeyPad to Preset 2 by unplugging the USB cable and then holding channel button 2 (S A2) while plugging the USB cable back in.
To set the controller to use external sync for the arpeggiator and run in sync with Bitwig Studio, unplug the USB cable, then hold down the ARP button while plugging the cable back in.
Now channel buttons 1 and 8 (S A1 + A8) should light up. Press channel button 8 (S A8) for external sync.
| GLOBAL | |
|---|---|
| S A1-A8 | Mute Track. |
| S B1-B8 | Solo Track. |
| S C1-C8 | Arm Track. |
| S C4 + Shift |
Toggle Loop. |
| S C5 + Shift |
Tap Tempo. |
| S C6 + Shift |
Toggle Metronome. |
| S A1-A8 + Shift |
Launch Scene. |
| Octave up/down + Shift |
Scroll scenes up/down. |
| Play | Toggle transport play/pause. |
| Stop | Transport stop/go to start. |
| Record | Toggle transport record. |
| Stop + Shift |
Stop all clips. |
| Record + Shift |
Toggle record overdub. |
| SCENE 1/MIX MODE | |
|---|---|
| E 1-8 | Track Pan. |
| K A1-A8 | Track Send 1. |
| K B1-B8 | Track Send 2. |
| F 1-8 | Track Volume. |
| S C7 / C8 | Scroll Track Bank up/down. |
| SCENE 2/DEVICE MODE | |
|---|---|
| E 1-8 | Device: Macros. |
| K A1-A8 | Device: Common parameters. |
| K B1-B8 | Device: User parameters. |
| F 1-8 | Device: Envelope parameters. |
| S C1 + Shift |
Device: Next user parameter page. |
| S C2 + C3 + Shift |
Select previous/next cursor device. |
| S C7 + C8 + Shift |
Select previous/next cursor track. |